Summer Starts Here - Save up to 70%
Best 2007 Chevrolet Silverado New Body Gooseneck Options- Video
Today we're going to be taking a look at the best gooseneck hitches available for the 2007 Chevrolet Silverado new body style. Let's take a look through the three hitches that we've got picked out. We've got our CURT Double Lock. We've got the B&W Turnover Ball. We're also going to have the Draw-Tite Hide-a-Goose. Now all three of these hitches are underbed mount. more
7/7/2017 7:53:28 AM
Gooseneck Trailer Hitch Installation - 2007 Chevrolet Silverado New Body- Video
Today on our 2007 Chevrolet Silverado 2500 HD Extended Cab we're going to be installing the Reese fold-down gooseneck trailer hitch with installation kit, part number 8339-4434. Now here's what our Reese fold-down gooseneck hitch looks like installed on the bed of our vehicle. Now let's go ahead and go over some operation. To use the ball you'll simply lift up here on this ring. This will allow the ball to be raised into the upright position. When you're done towing you simply raise the lever again. more
12/10/2014 2:49:30 PM
B and W Gooseneck Trailer Hitch Installation - 2007 Chevrolet Silverado New Body- Video
Today, in this 2007 Chevrolet Silverado, New Body extended cab, we're going to install part number BWGNRK1057. Let's take a quick look into the operation of the hitch. It's in the locked position so we'll go ahead and pull it and twist it towards the front and it holds it open. Now, when we lock it, pull back, push it back down, let it slide back in. We have our hitch open, with the lock pulled out then we go ahead and install our ball. It's in place like that, we lock our handle. more
4/21/2014 3:52:11 PM
Gooseneck Hitch Installation - 2007 Chevrolet Silverado New Body- Video
Today on our 2007 Chevy Silverado, New Body style, we'll be installing the B and W Turnover Ball, Underbed, Gooseneck trailer hitch with custom installation kit, rated for 30,000lbs. Part number BWGNRK1067. Now we've already gone ahead and removed the spare tire, as well as pulled both the rear wheel off the vehicle. Next we'll need to go ahead and lower the exhaust down, we'll do this by removing the rear rubber exhaust hanger and letting the exhaust hang down low enough. Now we'll need to remove the heat shield, or at least a portion of it. The directions say to remove between crossmember and crossmember, but it's actually between the hatch channel of the actual bed, not the crossmember or the frame of the vehicle. You really only need to remove the heat shield in between the two hatch sections on the bed, to do this you can either use a set of tin snips or a cutoff wheel. Now that we have the heat shield out of the way, now we need to go into the bed of the vehicle and mark our location where we'll be drilling a 4-inch hole through the bed of the vehicle. more
12/16/2013 8:45:34 PM
Gooseneck Trailer Hitch Installation - 2007 Chevrolet Silverado New Body DH1304- Video
Today on our 2007 Chevy Silverado 2500 HD, we'll be installing the Blue Ox Diamond Hitch, part number DH1304. We've already gone ahead and removed the spare tire as well as the two rear wheels on the vehicle. We've removed the two rear wheels only for demonstration purposes so that you will be able to see what we're doing. We'll now go ahead and measure on the underside of the bed from the rear of the bed making sure not to include the tailgate forward. We'll insure that the location of the ball is approximately one inch in front of the centerline of the axle. We'll now go to the top side of our bed where we'll use a tape measure to find the center of our bed. We'll measure from the two wheel wells across. more
4/10/2013 3:01:56 PM
Gooseneck Trailer Hitch Installation - 2007 Chevrolet Silverado- Video
Today on this 2007 Chevrolet Silverado were going to install part number 9465-34. Were going to start off our install with the rear wheels removed and the spare tire lowered out of the way. You dont have to do this, but it makes access to the insulation and hitch a lot easier. Now this vehicle has an OEM brake controller installed in the frame rail, so theres two bolts we have to loosen up so we can remove it from the rail. All we have to do is just loosen up the bolts, push it to the side and we can remove it from the frame. Were going to let it sit inside the frame for now. more
1/24/2013 7:11:55 AM
Filter Videos
Filter Videos
